They’re affordable for everyone’s budgets, and look stunning. They come in many sizes, shapes, and colours. They can be used to create outdoor patios, walkways, and gardens to name just several. This video will help you understand how to put concrete pavers in.
Before you set up paver stone first, make sure you check with the utility company you are using for confirmation that you’re safe to dig. Next, use a pick or shovel to dig about eight to nine inches into the ground in the location in which you’d like the paver stones. You must then compact the soil using plates or alternative device. After that, make a filling using “pac”, a mixture of 34 inch stones and dust. Then smooth out the area once more. Once the area is flat again, use sand as the final bed material. The paver stones can be placed onto the sand after the surface is smoothed out. In the end, place the paver stones using the help of a hammer, to place them in place. The stones should be set in the rock. The pavers are secured by the metal rails that are positioned through their edges. Lastly, pour a polymer sand over top of the paver stone . Then, sweep it between those paver stones. To put the polymer mortar in its place, wet it. After an hour of curing, your new paver stone construction should be complete.